The lanterns and lampposts in our Residential Lighting Series, blend elegance and durability to enhance your outdoor space. Explore our Series I, Series II, and Series III New England Style fixtures, meticulously crafted to elevate and brighten your home and suitable for either sconce or post installation.
Contact us today for more info or to place an order.
Why Purchase Our Lanterns and lampposts?
Built to Last
Drawing on the durability of late 19th-century fixtures, we craft our products with lightweight, non-corrosive aluminum alloys, and stainless steel or brass fasteners for lasting quality. In addition, the urethane mastic coating ensures enduring gloss in practically any conditions.
Low Maintenance
Sealed light panels and covered brass condensation vents prevent outside elements from reaching the fixture’s interior. In addition, when maintenance or cleaning is needed, the hinged case design makes access easy.
Guarantees and Services
We stand behind our lanterns and lampposts with a lifetime limited craftsmanship guarantee. We also offer replacement parts, repair services, and refurbishment for fixtures and poles manufactured by our company. Trust in our commitment to quality and reliability.
Choose your lanterns and lampposts:
New England Style Lanterns
Series I
Starting at $650
Series II
Starting at $800
Series III
Starting at $900
Finial Styles
Glocester
Providence
Scituate
Warren
Mounting Options
Sconce
Base price for flush mount to exterior wall
Residential Pole
$750 for residential pole with direct burial to ground
Add $$ for concrete foundation
Specifications
| Dimensions | Height: from 2’ 3” to 2’ 8” Width: 10 3/4” |
| Glass Options | Standard Sheet Glass Wave Cylinder Restoration Glass |
| Lamping | LED, E26 medium base, Corn Cobb Non – Dimmable lamp, 30,000 Hrs. 3,000K (12 Watt, 1,200 Lumens) or 5,000K (12 Watt, 1,400 Lumens) |
| Fixture Components | Top Case: Cast aluminum case with Finial and aluminum hinge. Mid- Section (Optional): Cast aluminum housing and hinge. Bottom Case: Cast aluminum case, cast aluminum chimney cup with gallery, E26 medium base socket, 8.5” x 2.625” 75% satin chimney, 5’, #14 wire harness with ground protection/heat shrink tubing, 3“ Dia. I.D. x 4” Dia. O.D. fitter with (4) aluminum hex head bolts threaded to internally house (4) 1⁄4” x 1” stainless steel set screws. Set screws are concealed with a snap in plug |
| Fixture Materials | Aluminum Castings: Alloy #356 Structural Support Arms: Alloy #6063 Aluminum Tubing: Alloy #6061 Glass Light Panels: 1/16 thickness |
| Electrical Components | All UL approved |
| Fixture Construction | All castings are joined with MIG welds and external welds are ground smooth. |
| Fixture Finish | The cast aluminum Fixture is sandblasted and given a factory applied Direct to Metal, High Build, High gloss urethane coating with a DFT of 3-5 mils. Standard color is black. Custom colors and gloss finishes are available. |
| Maintenance | The cast aluminum fixture is protected from dust and elements with sealed clear glass panels and rubber gaskets to seal the open surfaces that are adjacent to hinges. A 1/8” X 1⁄2” closed cell gasket is placed between mating surface to close any gaps between mating bottom case and midsection or top case. The top and/or top and middle sections open away from the bottom section. For easy access when cleaning and maintaining. Castings pivot on (2) stainless steel 18-8 binding barrel screws to open. A single captive 10-24 18-8 stainless steel slotted screw holds the fixture closed and is recessed to be concealed, yet is easily accessible to open and close fixture. |
| Weight | Complete fixture is approximately 18 lbs |
| Dimensions | Height: 6’ Cast Wall Thickness: 3/8” – 1/2” |
| Foundation Mount Installation | A 10” dia. x 5/8” thick base plate with 2 1/2” riser are integral to the post casting and have (4) slip holes for mounting on (4) 1⁄2”X 6” stainless steel foundation bolts on an 8” bolt hole circle. Anchor bolts and template will be provided by manufacturer. |
| Direct Burial Installation | A 4” dia. 3’ x 1/4” tube is welded to the bottom of the aluminum post. A 12” x 12” x 1/4” plate is welded to the bottom of the tube to prevent sinking and leaning. |
| Access | The base comes standard with a removable cast aluminum access door secured with (2) 10-24 x 1-1/2”stainless steel screws. A GFI duplex electrical outlet with cover is also available as an option. |
| Ground Stud | 10-24 x 1” stainless steel (provided in the interior of the post) |
| Pole Finish | The cast aluminum post is sandblasted and given a factory applied Self Priming Direct to Metal, High Build, High gloss urethane coating with a DFT of 3-5 Mils. Standard color is black. Custom colors and gloss finishes are available. |
| Weight | Complete fixture is approximately 45 lbs |